The 8 Best Car Phone Mounts

The VANMASS Version 5.0 represents a significant upgrade in car phone mount engineering, combining military-grade durability with practical everyday functionality. The enlarged 2.8-inch suction cup delivers over 85 pounds of holding force, ensuring your phone remains secure even during aggressive driving or rough road conditions. The 44% increase in adhesive strength compared to previous generations reflects VANMASS's commitment to solving real-world mounting challenges that plague standard phone holders.

Flexibility is this mount's strongest asset. Whether you need dashboard, windshield, or air vent mounting, the VANMASS adapts to your vehicle's layout without compromise. The telescopic arm extends from 4.1 to 5.8 inches while the ball joint offers 360-degree rotation and 270-degree articulation, allowing you to position your phone at the most comfortable viewing angle. The reinforced sliding rail structure minimizes wobbling during acceleration and braking, a critical factor for safe navigation and video recording on the road.

Built for longevity, this mount withstands temperature extremes from -40°F to 194°F and resists UV damage, making it reliable across seasons and climates. The high-resilience silicone grips protect phones and cases from scratches, while the washable suction cup eliminates recurring replacement costs. With international military-grade shockproof certification and a 36-month warranty, VANMASS demonstrates confidence in this product's durability and performance.

Dashboard & Windshield Installation

1. Clean the surface thoroughly with the included wipe to remove dust and oils
2. Press the suction cup firmly onto the clean, flat surface
3. Twist the suction cup handle clockwise to lock it in place
4. Attach the phone cradle to the suction cup arm
5. Adjust the arm length and angle to your preferred viewing position

Important: Only use on flat, smooth surfaces. Do not apply to curved, leather, or fabric dashboards.

Air Vent Installation

1. Turn the vent hook knob counterclockwise to fully extend the hook
2. Insert the hook into a horizontal or vertical air vent blade
3. Turn the knob clockwise to shorten and secure the hook firmly
4. Attach the phone cradle and adjust positioning

Note: This hook is not compatible with round, cross, or diagonal vent designs. Vent blades wider than 1.07 inches may not work properly.

Maintenance

• Clean suction cup monthly with warm water and a soft cloth
• Allow to air dry completely before reapplying
• Wipe phone grips to remove dust and maintain grip strength
• Check arm stability periodically; tighten connections as needed

Is This Mount Right for You?

Best For: Daily commuters, rideshare drivers (Uber/Lyft), long-distance travelers, and anyone needing a secure, adjustable phone mount that works across multiple vehicle types and mounting locations.

Key Considerations

Vehicle Type: Compatible with pickup trucks, SUVs, sedans, sports cars, vans, and taxis. Works with 99% of vehicles.

Phone Size: Fits phones between 4-7 inches. Verify your phone's dimensions before purchasing.

Dashboard Surface: Requires a flat, smooth, non-porous surface. Curved dashboards, leather trim, and fabric surfaces won't hold the suction cup.

Air Vent Compatibility: Works with horizontal and vertical vent blades only. Round, cross, or diagonal vents require the dashboard or windshield mounting option instead.

Why Choose VANMASS Over Generic Mounts?

• Military-grade engineering ensures reliability in demanding conditions
• Three mounting methods provide maximum flexibility
• Proven 85+ pound holding strength vs. standard 30-40 pound alternatives
• Washable suction cup saves money on replacements
• Extended 36-month warranty provides peace of mind
• Reinforced construction minimizes wobbling and vibration

The VANMASS car phone mount stands out for its engineering rigor and real-world durability. After 10 years of development and evaluation of over 20,900 materials, VANMASS engineered a mount that handles extreme conditions. The 85+ LBS suction force comes from an enlarged PU adhesive system with a 2.8-inch diameter cup, delivering holding power significantly stronger than competing mounts. The steel-cored construction throughout the vent clip and mounting arms ensures the device won't rattle or shift on rough roads, while the temperature-resistant materials maintain integrity from deep winter cold to intense summer heat.

Versatility is a major strength here. The three mounting options (suction cup, vent clip, and dashboard adhesive) mean you can install this mount regardless of your vehicle type or interior layout. The universal phone cradle accepts devices from 4 to 7.2 inches wide and accommodates protective cases up to 0.7 inches thick, making it compatible with everything from compact phones to oversized flagships. The 360-degree ball joint and telescopic arm allow you to position your phone exactly where you need it, whether that's eye level on the windshield or at a convenient dash angle.

Practical design choices elevate this mount above budget alternatives. The release button sits on the back of the cradle for intuitive thumb access without awkward finger bending. Thickened cradle legs provide stable support for heavier phones during acceleration and braking. The vent clip includes soft silicone pads that protect your vehicle's vents from scratches, a detail often overlooked by competitors. Installation is straightforward with the included cleaning wipes, and the tear-notch design makes removal simple when you need to reposition or remove the mount.

Dashboard or Windshield Installation

1. Clean the mounting surface thoroughly with the included wipe and allow it to dry completely.
2. Peel away the protective film from the suction cup.
3. Press the suction cup firmly against the surface for 10 seconds, maintaining steady pressure.
4. Attach your phone to the cradle and adjust the arm to your preferred angle.

Important: Not compatible with leather dashboards. Choose windshield or vent mounting for leather interiors. For best results, use windshield or vent mounting when outside temperatures exceed 113°F.

Air Vent Installation

1. Open the vent clip by sliding the lever.
2. Position the clip on a horizontal or vertical vent blade (0.07-0.1 inch thickness).
3. Close the lever securely until the soft silicone pads grip the vent blade firmly.
4. Attach your phone and adjust the telescopic arm as needed.

Note: This clip is not compatible with round, cross-shaped, or diagonal-style vents.

Who Should Buy This Mount?

This VANMASS mount is ideal for drivers who want a dependable, long-lasting phone holder that works in almost any vehicle. If you own a larger phone, use a protective case, or frequently drive in extreme weather conditions, this mount's robust construction and temperature resistance make it an excellent choice. The multiple mounting options mean it works whether you drive a sedan, truck, SUV, or specialty vehicle.

Key Considerations

Surface Requirements: The suction cup requires a smooth, flat surface. Textured leather dashboards, curved surfaces, or areas with gaps will reduce suction effectiveness. Windshield mounting is the most reliable option for leather interiors.

Temperature Performance: While rated for -40 to 194°F, the suction cup performs best below 113°F. In hot climates, consider vent mounting as your primary option.

Vent Compatibility: Verify your vehicle's vent style before purchasing. This clip works with standard horizontal and vertical blade vents but not with round, cross, or diagonal designs common in some luxury vehicles.

Maintenance Tips

Clean the suction cup periodically with the included wipe to maintain maximum holding power. If the PU adhesive becomes less sticky over time, clean the surface thoroughly and reapply. The soft silicone pads on the vent clip can be wiped clean if dust accumulates.

The Miracase air vent car phone mount delivers solid performance at an unbeatable price. Its military-grade metal hook with silicone padding grips your vehicle's air vent blades firmly without slipping, even during aggressive driving or sudden stops. The design is straightforward and effective, avoiding unnecessary complexity while maintaining excellent stability. Whether you're navigating city streets or highway driving, this mount keeps your phone secure and accessible.

Setup is refreshingly simple. The mount clips directly onto your car's horizontal or vertical air vents without requiring tools, adhesives, or permanent installation. Once mounted, the 360-degree rotation allows you to position your phone in portrait, landscape, or any angle that suits your viewing preference. The quick-release button and adjustable clamp arms enable one-handed operation, so you can safely adjust your phone's position while keeping your attention on the road. This practical design reduces distractions and enhances driving safety.

Compatibility is genuinely universal across the smartphone market. The mount accommodates devices from 4.0 to 7.2 inches, including iPhones, Samsung Galaxy phones, Google Pixel devices, and virtually every other major brand. It even works with thicker protective cases, meaning you don't need to remove your phone's protection to use it. The carbon steel construction and ABS materials withstand temperature extremes and daily wear, backed by a 2-year manufacturer warranty and 36-month support commitment.

Step-by-Step Installation

1. Locate Your Air Vent: Find a horizontal or vertical air vent in your vehicle that's easily accessible from your driving position. Avoid round vents, which are incompatible with this mount.
2. Check Vent Blade Width: Ensure your air vent blades are 1.4 inches (3.6 cm) wide or narrower. The metal hook must fit securely between the blades.
3. Position the Mount: Align the metal hook with one of the vent blades and gently slide it into position. The silicone padding will grip the blade without damaging it.
4. Secure the Hook: Push the mount firmly until the metal hook catches the vent blade securely. You should feel resistance indicating a solid grip.
5. Insert Your Phone: Open the adjustable clamp arms and place your smartphone between them. Ensure the phone sits centered and secure.
6. Tighten the Clamp: Adjust the clamp arms until your phone is held firmly but not excessively tight. The adjustable foot provides additional support for larger devices.
7. Test Stability: Gently shake the mount to confirm your phone won't slip. Make any final adjustments before driving.

Removal: Press the quick-release button and slide the mount away from the vent blade. Your phone will remain in the clamp until you remove it manually.

Is This Mount Right for You?

Best For: Drivers who want a reliable, affordable phone mount that works with multiple devices, those with horizontal or vertical air vents, and anyone preferring a non-adhesive mounting solution that doesn't require dashboard modification.

Consider Alternatives If: Your vehicle has only round air vents, your vent blades are wider than 1.4 inches, or you need a waterproof mount for frequent outdoor use.

Key Considerations Before Buying

• Vent Type: Confirm your car has horizontal or vertical air vents. This mount will not work with round vents.
• Vent Blade Width: Measure your air vent blades to ensure they're 1.4 inches or narrower for proper hook engagement.
• Phone Size: Your smartphone should be between 4.0 and 7.2 inches. Larger tablets are not compatible.
• Case Compatibility: This mount works with thick cases, so you won't need to remove your phone's protection.
• Viewing Angle: Test the 360-degree rotation to find the optimal position for navigation, music control, or calls.

Maintenance Tips

Periodically clean the silicone padding on the metal hook to maintain grip strength. Avoid exposing the mount to excessive moisture or extreme heat. Check the clamp arms occasionally to ensure they remain tight and secure.

The Miracase MagSafe car mount stands out in a crowded market of smartphone holders through its combination of powerful suction technology and flexible mounting design. The 89-pound vacuum lock base delivers industrial-grade gripping force that keeps even large flagship phones secure during sharp turns, sudden braking, and bumpy terrain. Paired with 20 N55 magnets producing 3600gf of magnetic force, this mount eliminates the frustration of phones sliding or dropping during your commute.

Versatility is another major strength. The mount's 360-degree rotating base, 210-degree articulating arm, and 360-degree ball joint allow you to position your phone in portrait mode for calls or landscape mode for GPS navigation without removing it from the mount. The foldable design collapses to half its size when idle, preserving your windshield view and interior aesthetics. Installation takes seconds with true one-handed operation, and the mount works seamlessly with iPhone 12-17 series phones with MagSafe, plus virtually every Android device when paired with the included metal ring.

Durability and reliability round out the package. The 4-layer nano gel suction cup withstands temperatures from -20°F to 200°F, making it suitable for harsh climates without melting or leaving residue. If suction weakens from dust accumulation over months of use, a simple rinse with water and air-dry restores approximately 99 percent of gripping power. The 365-day replacement warranty provides peace of mind, and the mount's closed magnetic field design ensures zero interference with cellular signals, GPS, or Bluetooth connectivity.

Installation Steps

1. Clean and dry your mounting surface (dashboard, windshield, or center console) thoroughly
2. Remove the protective film from the suction cup base
3. Press the mount firmly onto your chosen smooth, flat surface for 10-15 seconds
4. Attach your smartphone directly if it has MagSafe, or use the included metal ring for non-MagSafe phones
5. Adjust the 360-degree rotating base and ball joint to your preferred angle

Maintenance & Cleaning

• Rinse the suction cup under clean running water to remove dust and restore gripping power
• Air-dry completely before reattaching to your vehicle
• Avoid paper towels, which leave lint; use a soft cloth instead
• Keep the mounting surface clean and dry for optimal adhesion
• If suction weakens over time, press down firmly to reset the grip

Best Practices

• Mount on smooth, flat surfaces only; avoid curved dashboards and rough textures
• Keep the mount out of direct sunlight for extended periods
• Use the included metal ring for non-MagSafe cases; avoid silicone, leather, suede, or very thick armor cases without the adapter
• In extreme heat, allow the mount to cool before applying pressure

Who Should Buy This Mount?

The Miracase MagSafe car mount is ideal for drivers who prioritize security and reliability. If you own a newer iPhone (12 series or later) with MagSafe, this mount provides seamless compatibility. Android users will appreciate the universal metal ring adapter that works with virtually every smartphone on the market. Drivers in hot climates like Texas or Arizona will benefit from the extreme temperature resistance, while those who frequently navigate using GPS will love the landscape-mode flexibility.

Key Considerations

• Surface Compatibility: This mount requires a smooth, flat mounting surface. If your dashboard is curved or textured, adhesion may be compromised.
• Case Type: MagSafe cases work best. For other cases, the included metal ring provides a strong alternative, but very thick armor cases may not work well.
• Maintenance: The suction cup requires occasional rinsing to maintain full gripping power, especially in dusty environments.
• Temperature Extremes: While the mount handles extreme temperatures, avoid prolonged direct sunlight exposure.

Comparison Factors

Unlike basic adhesive mounts, this model combines suction and magnetic technologies for dual security. The 89-pound suction force exceeds most competitors, and the 360-degree rotating design with foldable profile offers more flexibility than fixed dashboard mounts. The 365-day warranty and responsive customer service distinguish it from budget alternatives.

The Kaistyle MagSafe Car Mount delivers reliable smartphone security with its powerful magnetic system that locks your device in place within one second. The dual mounting approach is particularly smart: the adhesive dashboard base works for most vehicles and offers a clean, integrated look, while the steel vent clip provides an alternative for drivers who prefer not to modify their dashboard. Both methods are engineered for durability, with the adhesive using industrial-grade 3M VHB technology and the vent hook made from steel rather than plastic.

What makes this mount stand out is its thoughtful design for everyday driving. The 360-degree swivel joint lets you position your phone at your preferred viewing angle without taking your eyes off the road for long. The compact footprint means it won't block your dashboard view or obstruct air vents. For iPhone users, direct MagSafe compatibility means no additional metal rings or adapters are needed, though the included metal ring makes it compatible with Android devices and non-MagSafe iPhone cases. Installation is straightforward, and the one-hand operation makes grabbing and replacing your phone simple while you're driving.

The main consideration is that the adhesive mounting is permanent once applied, so you'll want to choose your placement carefully. The mount also carries a 2-year manufacturer warranty, which reflects the brand's confidence in the product's durability. Whether you're an Uber driver, a daily commuter, or someone who simply wants better phone access while driving, this mount addresses the core need for secure, unobtrusive smartphone mounting.

Dashboard Adhesive Mounting

Step 1: Clean the dashboard area thoroughly with rubbing alcohol and let it dry completely. This ensures the adhesive bonds properly.

Step 2: Remove the adhesive backing from the mount base and press firmly onto your chosen dashboard location for 30 seconds.

Step 3: Wait at least 24 hours before attaching your phone to allow the adhesive to cure fully.

Step 4: Attach the MagSafe head to the mount and position your phone.

Vent Clip Mounting

Step 1: Insert the steel hook into your car's air vent slats, ensuring it's seated firmly.

Step 2: Attach the MagSafe head to the hook mount.

Step 3: Position your phone and adjust the swivel joint to your preferred angle.

For Android Phones and Non-MagSafe Cases

Attach the included metal ring to your phone case or the back of your device before mounting. The ring will magnetically connect to the MagSafe head, providing the same secure hold as native MagSafe devices.

Who Should Buy This Mount?

This mount is ideal for drivers who prioritize safety and convenience. If you spend significant time on the road, need hands-free navigation, or want to prevent phone distractions while driving, this is a solid choice. It's especially valuable for rideshare drivers, delivery professionals, and anyone who regularly uses GPS or takes calls while driving.

Mounting Method: Which is Right for You?

Choose Adhesive Mounting If: You want a clean, integrated look that doesn't interfere with your air vents. This works best in vehicles where you have a suitable flat dashboard space. The adhesive is permanent, so choose your location carefully.

Choose Vent Clip Mounting If: You prefer a non-permanent solution or need flexibility to move the mount between vehicles. The steel hook is durable and won't damage your vents, though it may slightly reduce airflow in that vent.

Compatibility Considerations

iPhone users with MagSafe-compatible phones or cases can use this mount immediately without adapters. Android users and those with non-MagSafe iPhone cases should use the included metal ring adapter. Simply attach the ring to your device or case, and it will magnetically connect to the mount's MagSafe head.

Maintenance Tips

The magnetic connection is maintenance-free, but periodically check the adhesive bond if using dashboard mounting. If you notice any loosening after months of use, you can carefully remove the mount and reapply it with fresh adhesive. Keep the magnetic surfaces clean to maintain optimal holding strength.

The YRU C126 represents a thoughtful evolution in car phone mounting technology. With a suction force exceeding 90 lbs, this mount delivers the kind of rock-solid grip that makes you forget your phone is even there. The dual-button release mechanism is a genuinely practical improvement over single-button designs, allowing both hands to operate it comfortably and reducing the frustration of fumbling with one finger while driving. The 360-degree rotation ensures you can position your display in portrait or landscape mode instantly, adapting to navigation apps, video calls, or music streaming without repositioning the entire mount.

Build quality stands out as a defining strength. The premium PC+ABS plastic housing resists yellowing and melting across a staggering temperature range from -40°F to 203°F, making it reliable whether you're dealing with frozen winters or scorching summers. The included steel-core air vent clip provides a secondary mounting solution that's genuinely useful for vehicles with problematic dashboards or during extreme heat. The integrated silicone cable organizer is a small but appreciated addition that keeps your charging cables from becoming a tangled mess across your lap and center console.

Practical considerations matter here. The suction cup performs best on clean, smooth, flat surfaces, so dashboard preparation with the included wipes is essential. Leather dashboards and heavily textured surfaces may require switching to windshield or vent mounting instead. Once properly installed and given the recommended one-hour setup time, the mount delivers the security you need for confident daily driving. The combination of multiple mounting options, universal phone compatibility, and genuine durability makes this a mount that justifies keeping for years rather than replacing seasonally.

Dashboard or Windshield Suction Cup Installation

Step 1: Clean the target surface thoroughly with the included cleaning wipes. Remove any dust, dirt, or residue. Allow to dry completely.

Step 2: Choose a flat, smooth area without cracks or gaps. Windshields work best if your dashboard is textured or unsuitable. Press the suction cup firmly onto the cleaned surface using steady pressure.

Step 3: Allow 1 hour of cure time before mounting your phone. This ensures maximum adhesion strength.

Step 4: Insert your phone into the cradle and adjust the 360-degree rotation to your preferred angle.

Air Vent Clip Installation

Step 1: Locate a vertical or horizontal air vent blade in your vehicle.

Step 2: Open the rotating hook clamp and position it around the vent blade.

Step 3: Twist the adjustment knob until the clip grips the vent securely without damaging the blade.

Step 4: Mount your phone and adjust rotation as needed.

Important Tips

• Use vent clips instead of suction cups when outside temperature exceeds 113°F
• Leather, waxed, or oiled dashboards are not suitable for suction cups; use windshield or vent mounting
• If suction cup loses grip, check for dust or residue on the cup surface, rinse with water, and reattach
• For best results, install when ambient temperature is between 68°F and 77°F

iPhone Models

iPhone 17, 17 Pro, 17 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 13, 13 Pro, 13 Pro Max, 12, 12 Pro, 12 Pro Max, 11, 11 Pro, 11 Pro Max, XS, XS Max, XR, SE

Samsung Galaxy Models

S26, S26+, S26 Ultra, S25, S25+, S25 Ultra, S24, S24+, S24 Ultra, S23, S23+, S23 Ultra, S23 FE, S22, S22+, S22 Ultra, S21, S21+, S21 Ultra, S20, S20+, S20 Ultra; A Series: A57, A56, A55, A54, A53, A52s, A35, A34, A33, A32, A25, A24, A15, A14, A13, A12, A04s

Other Brands

Motorola Moto G, G 5G, G Stylus, G Power, G Play, G Pure; OnePlus 13, 13R, 12, 12R, 11, 10 Pro, 10T, 9 Pro, 9, 8T, 8 Pro, 8, 8 5G, 7T Pro 5G, 7T, 7 Pro, 7; OnePlus Nord N40 5G, N30 5G, N20 5G, N10 5G, N300 5G, N200 5G; LG V50 ThinQ 5G, V40 ThinQ, V35 ThinQ, V30S ThinQ, V30, G8X ThinQ, G8s ThinQ, G8 ThinQ, G7 ThinQ, G6; Motorola XR21 5G, XR20 5G, G400 5G, G310 5G

Case Compatibility

Works with silicone, clear, rubber, and leather protective cases up to 0.67 inches thick. Not compatible with ring stands or cases with uneven surfaces that exceed the maximum thickness specification.

The VANMASS Version 6.0 represents a significant advancement in car phone mounting technology, featuring military-grade construction that sets it apart from standard alternatives. The expanded 69mm suction cup delivers exceptional holding power rated for 85 pounds, while the reinforced PC and ABS materials undergo rigorous temperature testing from -40°C to 90°C. The inclusion of multiple safety certifications, including military-grade shockproof verification, demonstrates the manufacturer's commitment to reliability and durability over the product's lifespan.

From a practical standpoint, this mount excels in versatility and adjustment capability. The 360-degree horizontal rotation combined with 120-degree arc movement and a retractable arm extending from 5.26 to 9.81 inches provides drivers with optimal viewing angles for navigation without obstructing the windshield. The adjustable feet system accommodates phones ranging from 4 to 7 inches, including those with protective cases, while military-grade silicone padding prevents slipping and protects device surfaces from damage during driving.

Compatibility spans nearly all modern smartphones and vehicles, with the mount functioning on dashboards, windshields, air vents, and even non-automotive surfaces like desks. The three-year development process included extensive road evaluation with over 20,000 miles of real-world assessment, ensuring the design performs consistently across diverse driving conditions. Installation requires clean, smooth mounting surfaces and careful application of the suction cup, with the safety lock buckle providing an additional security mechanism for peace of mind.

Proper Installation Steps

Step 1: Prepare the Surface
Use the included cleaning kit to thoroughly clean your mounting surface. Select a flat, smooth area free from curves or deep texture. Leather dashboards are not recommended for suction cup mounting due to surface characteristics.

Step 2: Apply the Suction Cup
Remove the transparent protective film from the suction cup bottom. Position the mount on your chosen surface and press firmly from one side to the other, ensuring all edges seal properly and air is completely pushed out.

Step 3: Secure the Mount
Fasten the safety lock buckle to provide additional security. For air vent installation, attach the hook clip to vertical or horizontal vent blades (under 1.38 inches wide).

Step 4: Adjust for Your Phone
Position the adjustable feet (0-0.78 inches) and side clamps to accommodate your phone size and case thickness (maximum 0.6 inches). The non-slip fingerprint texture ensures a secure grip.

Maintenance Tips

Periodically clean the suction cup and mounting surface to maintain adhesion strength. In summer months, avoid direct sunlight on the mount to preserve suction power. The mount is reusable and washable for long-term durability.

Phone Compatibility

This mount accommodates virtually all smartphones between 4-7 inches, including:

• iPhone: 17 Pro Max, 17 Pro, 17, 16 Pro Max, 16 Pro, 16 Plus, 16, 15 Pro Max, 15 Pro, 15 Plus, 15, 14 Pro Max, 14 Pro, 14 Plus, 14, 13 Pro Max, 13 Pro, 13, 12 Pro Max, 12 Pro, 12, 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, SE
• Samsung Galaxy: S25 Ultra, S25+, S25, S24 Ultra, S24+, S24, S23 Ultra, S23+, S23, S23 FE, S22 Ultra, S22+, S22, S21 Ultra, S21+, S21, S20 series, S10 series, Note series, A75, A55, A74, A53, M series
• Google Pixel: 9 Pro XL, 9 Pro, 9, 8 Pro, 8, 7 Pro, 7, 8a, 7a, 6 Pro, 6, 6a, 5 Pro, 5, 5a, 4, 4 XL
• Other Brands: LG, OnePlus, Nokia, Xiaomi, OPPO, Motorola

Vehicle Compatibility

Works with 99% of vehicles including sedans, SUVs, pickup trucks, vans, taxis, sports cars, and commercial vehicles. Compatible with both vertical and horizontal air vents (blade width under 1.38 inches). Can also be used on desks, kitchen counters, bathrooms, and office spaces.

Case Compatibility

Supports phones with cases up to 0.6 inches thick. Adjustable feet and side clamps accommodate most protective cases without requiring removal.